10KW off/on-grid working system wind turbine
Application
Wind turbine is an equipment to convert wind energy into electric power which is charged into storage battery group or interface to utility grid. It can be widely used in rich wind areas.
Now we have 240v-500vdc off grid working system, wind solar hybrid system. It is capable of providing power for lighting, TV, washing machine, refrigerator, small water pump, air conditioner, telecommunication equipment and so on. It can used for the oil field, farm, island, small village, villa…
On grid working system 240v-600vdc: wind turbine output 3 phase AC power, PWM on grid controller convert AC to DC and supply steady DC voltage to grid tie inverter. The power can be use for home appliance, extra power interface to the utility grid.
Structure
10kw wind turbine off grid working system including: wind turbine main body( blades rotor, permanent magnet generator, rotor body, braking part, tail rod, tail vane), stand alone tower or lattice tower, charge controller with dump load, battery group, inverter.
10kw wind turbine on grid working system including: wind turbine main body (blades rotor, permanent magnet generator, rotor body, tail rod, tail vane), stand alone tower or lattice tower, PWM on grid controller with dump load, grid tie inverter.
10kw wind turbine normal spec
| HAWT FD8-10KW@200rpm | |
| RATED POWER | 10kw |
| MAX.POWER | 15kw |
| ROTOR DIAMETER | 8.0m |
| BLADE NUMBER | 3pcs |
| CUT IN SPEED | 3m/s(6.7mph) |
| RATED SPEED | 12m/s |
| MAX. WIND SPEED | 50m/s |
| SWEPT AREA | 50.24m2 |
| START TORQUE | 7n/m |
| Working wind speed | 4-30m/s |
| VOLTAGE OUTPUT | 240v-500vdc,240v-600vdc-110/220/380vac at 50/60hz |
| TOWER-UP WEIGHT | 890kg |
| GENERATOR | Permanent-magnets ;3 phases;AC |
| BLADES | Polyester resin reinforced with fiber glass |
| CONTROLLER | On-grid, off-grid, or hybrid system |
| INVERTER | Single/three phase pure sine wave inverter, grid tie inverter |
| TOWER-UP WEIGHT | 12-30m; stand alone tower, lattice tower |
| TYPE | Up-wind horizontal rotor |
| SPEED REGULATION | Electromagnetic brake +Yawing |
| STOP METHOD | Electromagnetic brake + manual brake |
| NOISE | 44db from 60m with a wind speed of 8m/s(65yd and 17.8mph) |
| ANNUAL PRODUCTION(min-max) | 10000kwh-30000kwh |
| CO2 SAVED | 8750-26250kgs |
| ANTICORROSION PROTECTION | Sealed design + hot aluminum spray + hot galvanization + UV resistant paint |
| DESIGN | According to EN61400-2 |
for urich wind place , we recommend FD10-10KW wind turbine . The larger blades rotor diameter has lowerrated wind speed . Also the installation blade angle and make the largest angle . This way wind turbine will workbetter in low wind speed condition
10kw output powegrid inverter input data ( rotatitage , powerdata)
WIne main features
Blades: manufactured according to the structural principle and technology of the propeller. Optimum width TSR high aspect ratio with protective film on the edges, long working life blade type selected through wind tunnel tests high efficiency, low noise blade rotor: hub is cast and shaped; blade rotor and generator with universal connection direct drive connection reliable, durable, smooth running vibration-free generator rotor. NdFeB permanent magnet prefabricated tangential magnetic circuit rotor; high flux density, small volume, good manufacturing process, high performance using SKF, NSK bearings closed drive slip ring, cable will not get tangled speed regulation: yaw. Simple, reliable and safe anti-corrosion treatment. All external parts are anti-corrosion designed against salt, fog, haze and sand storms and can be: boom towers, tilt towers, freestanding towers, hydraulic towers. It can be designed according to your requirements 100w, 500w 1kw, 2kw, 2.5kw automatic brake; 3kw, 5kw, 10kw, 15kw, 20kw, 25kw, 30kw automatic brake system and manual brake system wind turbines are designed to be simple, safe, reliable and maintenance free providing low wind level, rich wind level solutions; wind turbine OEM service.
